Traceability is the ability to follow a product backwards (which raw material lots it came from) and forwards (who it was delivered to). It is mandatory for every food business under Article 18 of Regulation (EC) 178/2002, and it is the first thing you are asked for in an alert or an inspection.
This tutorial explains how to implement it in a workshop or kitchen in the order that works, without stopping production. It is written using Recipok as the tool, but the order works just as well on paper.
Before you start: the checklist
We recommend keeping a checklist with the steps below and ticking them off as you go. That way you will not miss any, and you will know where you stand if the implementation drags on. There is a free traceability template you can use as a paper record in the meantime.
The foundation: the two inventories
For traceability to flow you need to understand what moves each inventory:
- Raw material inventory (essential). It goes up with deliveries from suppliers and with the semi-finished products you make and store to use in other recipes. It goes down with each production order, which deducts the ingredients it consumes.
- Finished product inventory (recommended). It goes up with the production orders that make finished products and goes down with the delivery notes for dispatches to your shops or trade customers.
If both match, you can rebuild any lot in seconds. If not, no software can save you: that is why the order matters.
The ten implementation steps
1. Digitise all your recipes
This is the step everything hangs on. If tomorrow you produce something that has not been set up, its raw materials cannot be deducted and the chain breaks. Start in this order:
- Semi-finished products (sourdough starters, creams, fillings, bases): those used inside other recipes.
- Final products: those that undergo no further processing and go to the display counter or the customer.
You do not need to type them in: in Recipok you can upload the recipe as a PDF, Excel file or a photo of your notebook and it is built automatically with your ingredients.
2. Clear any test stock
Before counting, check there is no product stock created during tests or by mistake. Start clean.
3. Count the finished and semi-finished products you already have
Count what is in the cold rooms and display counters, product by product, and create a production order for each one to give it a lot. In that order do not deduct raw materials (they were consumed before you started) and state whether it goes to finished product or to ingredient. Stick the internal label with the lot on each container.
4. Count the raw materials
Count ingredients and accessories (containers, boxes, doilies). Mark what has been counted so nobody touches it without telling you while the count lasts.
5. Enter the opening stock of raw materials
Create a goods-in record with what you counted. It can go to a generic supplier (“opening stock”) to keep it simple, with one lot per ingredient.
6. Start recording actual production
From here on, every production run has its production order. The order suggests the raw material lots in order of arrival (first in, first out) and deducts the stock. You confirm, or change the lot if you are using a different one at the bench.
7. Generate the dispatch delivery notes
Every dispatch to a shop or a trade customer leaves with its delivery note and its lots. This is what lets you know who received a specific lot, and what the inspector asks for.
8. Check the finished product inventory
After a few days, count again and compare with what the system says. Discrepancies at this stage are usually production runs or dispatches that were not recorded: correct them and find out why they happened.
9. Check the raw material inventory
Do the same with the ingredients. If a lot does not match, adjust it so the lots suggested by the production order match the ones actually on the shelf.
10. Record every supplier delivery
From now on, all goods arriving are entered with their lot and expiry date, the same day they are unloaded. To make it quick, in the Integral plan Recipok reads the supplier's delivery note and prepares the goods-in record with lots and quantities; you just check it.
Routine tasks so nothing gets out of line
- Regular stock counts: a weekly count of the fastest-moving items keeps the lots in sync.
- Stock adjustments: waste, breakages or weighing errors throw stock out and mean the suggested lots are not the real ones. Adjust the lots in stock and set to zero those that no longer exist.
- Drill: now and then, pick a lot at random and check you can follow it backwards and forwards. In Recipok the traceability drill takes one click.
The most common mistakes
- Starting with goods in before having the recipes: the first production order cannot deduct anything.
- Forgetting semi-finished products: if the pastry cream does not have its own lot, the thread is lost between the milk that came in and the cake that went out.
- Deducting raw materials in the opening stock count: it leaves stock negative from day one. We explain it in how to avoid negative stock.
- Leaving goods in until Friday: deliveries are recorded when the goods arrive, not when there is time.
If you get stuck
The help centre guide set up your workshop's traceability in a week details every screen. And if you would rather we set it up with you, our onboarding service supports you from start to finish, with your production running.