Start free

Home › Blog › Articles

Food traceability exercise (mock recall): how to do it step by step

The inspector points at a lot and asks where it came from and where it went. This is how to prepare for that test so it takes minutes, not a whole afternoon hunting for paperwork.

✓ Reviewed on November 19, 2026 Reading time: 6 min By the Recipok team
Example · PDF

Example production record

The document that links a finished product lot to the raw material lots it contains. It is the centrepiece of any traceability exercise.

PDFejemplo-de-parte-de-produccion-en-la-industria-alimentaria.pdf
To see what data yours should capture (example in Spanish)
Download the example ↓

What a traceability exercise is

A traceability exercise (or mock recall) is a controlled test: you pick a real lot and check that you can say where its ingredients came from and where it ended up, with the quantities adding up and in a short time. It is exactly what you would have to do if a food safety alert arrived tomorrow, but without the pressure of having product out on the market.

Traceability is mandatory for every food business under Regulation (EC) 178/2002: you must know who you buy each ingredient from and who you deliver each product to, "one step back and one step forward". The exercise is how you prove that system does not just sit in a drawer, but actually works.

The food safety inspector may ask for it during a visit, your auditor will require it if you work to IFS or BRCGS, and more and more trade customers (distributors, hotels, institutional caterers) ask for it before approving you as a supplier.

Why do it before you are asked

Worried pastry chef in his kitchen facing a health inspection without a traceability mock recall done
  • You find the gaps calmly. A dispatch nobody recorded, a semi-finished product without a lot, a delivery note without an expiry date. Better to find out on a quiet Tuesday than with an alert open.
  • You withdraw only what is needed. If you know exactly which lots contain the affected flour, you withdraw those and not the whole week's production.
  • You face the inspection with confidence. A recent, documented exercise with its corrective actions is one of the best proofs that your food safety plan is actually applied.
  • You tidy up the workshop. Process improvements almost always turn up: where labelling is done, who records goods in, how lots are rotated in the cold room.

The two tests inspectors ask for

In practice, a traceability exercise boils down to two questions. The inspector usually chooses the lot, so preparing an "easy" one will not do.

Gloved inspector filling in a health inspection form

1. Backward traceability: from a finished product to its raw materials

You are shown a product with a lot (for example, muffins from lot MG-2611) and you must show:

  1. The label of the product with that lot, the consumer label or the internal one if it is a semi-finished product.
  2. The production record or order that made it, with the date, the quantity produced and the lots of each ingredient used. It is the document you have as an example above.
  3. The goods-in documents for those raw materials: the supplier's delivery note or invoice with its lot and expiry date.
  4. Where that lot went: which customers it was shipped to (sales delivery notes) or which other items it was used in as a semi-finished product.

2. Forward traceability: from a raw material to your customers

Now the starting point is a supplier lot, for example a lot of butter. You must show:

  1. When it came in and in what quantity (delivery note or goods-in record).
  2. Which production runs it was used in, with the finished product lots they generated.
  3. Where those products went: customers, your own shops, counter sales.
  4. How much is left in stock, if any.

How to do the exercise, step by step

  1. Define the scope. A backward test, a forward test or both. Ideally do both, starting with a product with several semi-finished products (a cake with sponge, custard and coating puts the whole system to the test).
  2. Pick the lot at random. Or ask someone else to choose it. Write down the start time: response time is part of the result.
  3. Gather the documents. Labels, production records, goods-in and dispatch delivery notes, cold room records if the product needs them.
  4. Do the mass balance. This is what separates a serious exercise from a box-ticking one. If 25 kg of butter came in, how much was used in each production run, how much was wasted and how much is left? If the numbers do not add up, a record is failing.
  5. Write down the end time and the issues. How long it took you, which document did not turn up, which piece of data was missing.
  6. Set corrective actions. Who does what and by when. Without this part, the exercise does not help you improve.
  7. Keep the signed report. With the date, lot chosen, result, time taken and actions. It is what you will show at the next inspection or audit.
How long would it take you to trace a lot today?In Recipok you type or scan the lot and see its origin and destination in seconds, with the PDF report ready for the inspector.
Start free

Mock recall on paper or with a digital system

With few products and low volumes, traceability on paper or in spreadsheets can work. The problem shows up when you do the exercise: delivery notes, production records and dispatch sheets have to be cross-checked by hand, and the mass balance turns into an afternoon of sums.

Paper or spreadsheetRecipok
Incoming lotCopied by hand from the delivery noteRecipok reads the delivery note and records lot and expiry date
Lots in productionThey must be written on every recordThe production record assigns them itself, earliest expiry first
Semi-finished productsEasy to lose the threadThey have their own lot and the final recipe inherits it
Searching for a lotGoing through folders and filesYou type or scan the lot and see the result
Mass balanceSums by handGoods in, usage and stock on the same screen
Report for the inspectionYou write it yourselfPDF of the exercise, recorded with its date

How the exercise is done in Recipok

In Recipok traceability comes from what you already do day to day, with no separate records:

  • Goods in: the raw material comes in with its lot and expiry date, from the supplier's delivery note.
  • Production: the production record deducts the lots you use and creates a new lot for what you make. Semi-finished products have their own.
  • Label: the product goes out with its lot printed, also as a QR code or GS1-128 if you need it.
  • Sale: the delivery note to the customer carries the lot and expiry date.

For the exercise, you type or scan the lot and Recipok shows you backwards which lots it came from and forwards which customers and items it reached, with the balance. You record it as a mock recall and download the PDF report. You will find the details in Traceability exercise in 1 click and Forward and backward traceability, and you can try it with a sample workshop on the food traceability page.

Lot traceability and stock are part of the Integral plan (see the plans), with a 15-day guarantee and no lock-in. If you are not ready to take the step yet, start with the free traceability template.

Common mistakes in a traceability exercise

  • Always choosing the same product, the one you know is well documented.
  • Forgetting the semi-finished products: yesterday's custard also has a lot, and it also contains milk and eggs with their own lots.
  • Not counting counter sales: if you sell to the end consumer you do not have to identify them, but you do need to know on which day and in which shop the lot was sold.
  • Skipping the balance: finding the documents is not enough if the quantities do not add up.
  • Not putting anything in writing: for the inspector, an exercise without a report does not exist.

And when the alert is real, follow the steps in this guide on what to do when a food alert comes in.

Frequently asked questions

Are traceability exercises mandatory?
The law requires you to have traceability (Regulation (EC) 178/2002, Article 18) and to be able to prove it when the authority asks. The exercise is how you check that it works: your HACCP plan should set how often you do it, and an inspector or an IFS or BRCGS audit may ask you for one on the spot.
How often should a traceability exercise be done?
At least once a year, and also whenever you change something important: a new supplier, a production line, the software you record lots with. Many audits ask for a documented annual one.
How long should it take?
There is no single legal deadline. Private standards such as IFS or BRCGS usually require full traceability to be obtained within a few hours. With a digital system, the search takes seconds; what takes time is reviewing the mass balance and signing the report.
What if the quantities do not add up in the exercise?
That is exactly what it is for. Note the difference, find the cause (an unrecorded dispatch, unrecorded waste, a wrongly assigned lot) and write down the corrective action. An exercise with well-resolved issues is worth more than one that is perfect on paper.

Keep reading

Make your next mock recall take ten minutes

Lot traceability, production records and HACCP in one place. Start free with 12 recipes.