Start free

Home › Blog › Articles

How to display food in display cases without breaking the cold chain

The display case is your best salesperson and, at the same time, the place where the cold chain breaks most easily. We explain how it works, how to arrange the product so the cold reaches everything and what to record so you can face an inspection with confidence.

✓ Reviewed on November 19, 2026 Reading time: 5 min By the Recipok team
How to display food in display cases without breaking the cold chain

In a pastry shop or a bakery, the display case does two jobs at once: selling and preserving. It has to show the product off and keep it safe for hours, with the door opening constantly and the heat of the shop pushing in. Understanding how refrigeration works helps you display better and avoid the most expensive problem: breaking the cold chain.

What cold is and how a display case produces it

Cold does not exist as such: it is the absence of heat. A refrigeration unit does not "put cold in", it takes heat out of the enclosed space and expels it outside. It does so with a compression circuit: a refrigerant gas absorbs the heat inside the display case as it evaporates and releases it outside as it is compressed and condenses.

That has a practical consequence: every time heat gets in (an open door, a tray straight from the workshop, the afternoon sun on the shop window), the unit has to work harder to recover the temperature. If more heat gets in than it can remove, the product warms up.

Forced-air and static display cases

  • Forced air (ventilated): a fan moves cold air between the trays. They chill quickly and evenly and recover temperature faster, but they tend to dry out uncovered products.
  • Static: cold air sinks by natural convection, with no fan. They keep moisture better, which suits fine pastry, but the temperature is less even between the top and the bottom.

When comparing units, look at the climate class the display case is certified for (ISO 23953). It tells you under which room conditions it holds its temperature: a display case designed for 25 °C and 60% humidity will not perform the same in a shop window in full sun.

Refrigerated gelato display case with tubs of ice cream on show

Humidity, the other enemy

Temperature is what the inspector checks, but humidity is what the customer notices:

Digital thermo-hygrometer for checking display case temperature and humidity
  • Too much humidity: condensation on the glass and trays, soft and sticky doughs, sugar that dissolves and a higher risk of mould.
  • Too little: dry sponges, puff pastry that loses its texture, creams that form a skin and loss of flavour.

A product that comes out worse than it went in damages your reputation even if it is safe. That is why it pays to separate what needs cold and humidity (cream cakes, mousses) from what needs a dry atmosphere (puff pastry, viennoiserie), each in the right type of display case.

How to arrange the product without breaking the cold

  1. Respect the load line. Display cases mark how high you can load them. Above it, the product is outside the curtain of cold air.
  2. Let the air circulate. Do not block grilles or push trays against the back. The air has to surround every piece.
  3. Do not put in warm product. Chill it first in a blast chiller or cold room. A lukewarm cake warms everything around it.
  4. The most delicate items where it is coldest. Cream, custard and meringue in the coldest zone; what keeps better in the warmer one.
  5. Restock little and often. Small trays that come out of the cold room when needed are better than a display case full from first thing.
  6. Look after the surroundings. No direct sun, away from ovens and with a clean condenser.

All without forgetting that the display case sells: the layout has to serve preservation and presentation at the same time. We go into more detail in how to display products in a display case.

Cakes arranged on the shelves of a refrigerated pastry display case

What the rules say about the cold chain

Regulation (EC) 852/2004 on the hygiene of foodstuffs states that the cold chain must not be interrupted for foods that need it. It allows limited periods outside temperature control for practical reasons of handling, transport, storage, display or service, provided they do not pose a health risk.

In practice, that translates into your HACCP plan: the maximum temperature each product allows, how long it can be out of the cold, how often you measure and what you do if a reading is out of range (fix the unit, assess the product, withdraw it if necessary). The usual benchmark for chilled pastry is to keep the product between 0 and 4 °C, but what your plan sets is what counts. Check also the requirements of your local food safety authority.

Your display case temperatures, without a notebookRecord the temperature of display cases and cold rooms every day in Recipok's HACCP, or let the sensors do it for you.
Start free

What happens if the display case does not preserve properly

Pastry worker placing meringue tartlets in the counter display case
  • Loss of quality: rubbery textures, creams that split, changes in flavour. The customer notices before anyone else.
  • Shorter shelf life: more product to throw away at the end of the day and more waste.
  • Health risk: in products with cream, custard or egg, a few hours at the wrong temperature are enough for bacteria to grow. Chilling them again does not fix it.

Records and labels: what the inspector asks for

A well-run display case is proved with paperwork, or better still, without it. In Recipok:

  • You set up each display case and cold room as a control point in the digital HACCP, with its maximum temperature, and the team records the reading from their phone. If it is out of range, it is recorded with the corrective action.
  • If you would rather not depend on anyone, temperature sensors record the temperatures in the HACCP automatically.
  • You print the display label for each product with name, price, ingredients and allergens, taken from the recipe itself.
  • And with lot traceability you know which lot is in the display case if you ever have to withdraw it.

If you are also thinking of replacing your unit, we help you decide in how to know whether you should replace your display case.

In short

Displaying food without breaking the cold chain depends on three things: a unit suited to what you display and to your premises, a way of loading and restocking that lets the cold do its job, and records that prove the temperature is maintained. The first you choose once; the second and third are a daily habit.

Frequently asked questions

What temperature should a pastry display case be?
For chilled products, such as cakes with cream, custard or meringue, the usual benchmark is between 0 and 4 °C in the product. The exact temperature is set by your HACCP plan according to what you display and what the manufacturer of each product states.
How long can a cake be out of the fridge?
As little as possible. Regulation (EC) 852/2004 allows short periods outside temperature control for practical reasons, such as handling or display, provided they do not pose a health risk. Set those times in your HACCP plan and stick to them.
Why do cakes go soggy or dry out in the display case?
Because of the relative humidity of the air. Forced-air display cases tend to dry the product out; static ones keep more moisture but can cause condensation. Choose the type of display case according to what you display and do not overload it.
Do I have to record the display case temperatures?
If your HACCP plan includes it as a control point, yes, as often as the plan says. It is one of the most frequently checked records in an inspection.

Keep reading

Display cases with the cold and the labels in order

Temperature records, display labels with allergens and traceability. Start free.