A cold room that loses temperature on a Saturday night can cost you all of Monday's stock. And a temperature sheet full of gaps can cost you a bad inspection even if the cold room works perfectly. Temperature monitoring protects both things: the product and your ability to prove you have looked after it.
In this guide you will see what temperature monitoring requires, how to organise it, what to do when something fails and how to automate it with sensors so the record does not depend on someone remembering.
What temperature monitoring is and why it is a critical point
Cold slows down the growth of microorganisms. If the temperature of a cold room rises, the product can spoil or become dangerous without any visible sign. That is why, in almost any food safety plan, the temperature of cold rooms, fridges, freezers and display cases is a control point: a limit to watch, a monitoring frequency and a planned action if the limit is exceeded.

The basic obligation is Regulation (EC) 852/2004, which requires every food business operator to apply procedures based on HACCP principles. How that is put into practice (which ranges, how often, who records) is decided by your own plan. If you do not have it in writing yet, start with our guide to the HACCP programme for pastry shops, bakeries and kitchens.
How to organise monitoring, step by step

- List your equipment. Every cold room, fridge, freezer, blast chiller and refrigerated display case is a point to monitor. Give each one a clear name (“Cold room 1 · dairy”, “Shop display case”).
- Set the range for each one. According to what it holds. As a guide, perishable chilled products are usually kept between 0 and 4 °C and frozen products at -18 °C or below, but the range is whatever your plan sets.
- Decide the frequency. At least one reading a day; in many workshops, two (opening and closing). Write it into the plan and stick to it.
- Assign responsibilities. Who records each day and who reviews incidents. If “whoever is free does it”, in the end nobody does.
- Define the corrective action. What is done if a reading is out of range: who is told, where the product goes, who decides whether it is used or thrown away.
- Keep the records. Date, time, value, person responsible and, if there was an incident, what was done. This is what you will show in an inspection.
What to do when a cold room goes out of range
A reading out of range is not a failure in itself: failing to react and to record it is. When there is a deviation:
- Check the reading. Has the door just been opened? Was it defrosting? Measure again after a few minutes.
- Protect the product. If the deviation is real, move it to another cold room that is working.
- Assess the product. Depending on how long it has been out and at what temperature, decide whether it can be used, reprocessed or thrown away.
- Call the technician if the equipment does not recover.
- Write it down. For example: “Cold room 2 at 6.8 °C. Product moved to cold room 1 and technician called.” That text is your corrective action.
If the product has already gone out to customers and there is a risk, your traceability comes into play: we explain it in what to do when there is a food alert.
Thermometer, paper sheet or sensor: which system to choose
| Thermometer and sheet | Recording on a phone | Automatic sensor | |
|---|---|---|---|
| Cost | Very low | Low | The cost of the sensors |
| Who records | A person, by hand | A person, from a phone | The sensor, on its own |
| Nights and holidays | No record | No record | Recorded |
| Reminders of what is pending | No | Yes | Not needed |
| Report for the inspector | The filed sheets | PDF or Excel | PDF or Excel |
For a business with one or two fridges, recording by hand on a phone is usually enough. With several cold rooms, or with expensive stock inside, a sensor pays for itself the first weekend it prevents a loss.
How it works in Recipok
In Recipok, every cold room, fridge or display case is a HACCP location with its own range and frequency. The team records from a phone or tablet, one by one or in bulk by zone, and the app reminds them of what is missing and flags anything out of range so the corrective action gets written down. Reports come out as PDF and Excel, ready for the inspection. It is all explained in HACCP records and in Locations, zones and limits.
Connected sensors: the record that logs itself
If you have connected temperature sensors, Recipok connects to their account and creates the HACCP temperature records automatically, in each cold room's location, at the times you choose: every 6 hours, every 12 hours or once a day. That way your cold chain record is complete at night and on holidays too.
The administrator sets it up once:
- Create the locations for the cold rooms in Recipok, with their temperature range.
- Connect your sensor account from the user menu, under Integrations, with the email and password of that account.
- Add each sensor in the HACCP module: name, the sensor's ID, the Recipok location, frequency and time of the first record.
- Check that it works with “Query sensor”: Recipok reads the latest temperature and saves it as a record straight away.
Each reading creates a temperature record alongside the other checks, and appears in the same reports. The details are in Temperature sensors.
Do not forget the display cases
The refrigerated display case on the counter is one more piece of cold equipment, and often the one under most strain: it is opened hundreds of times a day and in full view of customers. Add it as a location with its range and record it just like the cold rooms. There is specific advice in how to display food in cases without breaking the cold chain.
In short
A list of equipment, a range for each item, a frequency you actually keep, a person responsible and a planned action for when something fails. With that you have temperature monitoring that protects your product and stands up to an inspection. And if the sensors log it, even better: the record no longer depends on anyone's memory.
