Start free

Home › Blog › Articles

Which is the best label printer for your food workshop or kitchen?

The best label printer is not the most expensive one, but the one that prints the width you need, keeps up with the pace of the workshop and works with your software without a fight. Here is what to look for.

✓ Reviewed on November 19, 2026 Reading time: 4 min By the Recipok team

Why you need a label printer

If you sell anything pre-packed (biscuits, cookies, packaged viennoiserie, ready meals, cured meats, ice cream in tubs), that product must carry a label with the information required by Regulation (EU) 1169/2011: name of the food, ingredients with allergens highlighted, net quantity, best-before or use-by date, storage conditions, business details and nutrition information, plus the lot.

Writing all that by hand is not feasible, and a badly printed label looks careless. A good label printer gives you two things: compliance without effort and a professional image on the counter and in your online shop. If you want to go over what the label must include, read the guide on nutrition labelling for pastry shops and bakeries.

First, the technology: direct thermal or thermal transfer

Direct thermalThermal transfer
How it printsHeats thermal paper, which darkensMelts a ribbon onto the label
ConsumablesJust the roll of labelsRoll of labels and ribbon
Print lifeWeeks or a few months; fades with heat, light and rubbingVery durable; withstands cold, humidity and handling
Ideal forShort-life pre-packed labels, internal labels, display counterFrozen food, preserves, shipping boxes, long-life products

In most pastry shops, bakeries and kitchens direct thermal is enough and cheaper to run. Neither prints in colour: if you want your logo in colour, order a pre-printed roll.

What to look for when buying one

  • Label width. It is the most important decision. Compact 62 mm printers (such as Brother's QL range, very common in food workshops) are enough for most pastry and bakery packaging. If your labels carry a full nutrition table and a barcode, or you stick them on large trays or boxes, look at 104 mm (4-inch) printers, the format of Zebra and almost all logistics printers.
  • Continuous or die-cut roll. Continuous lets you decide the length of each label; die-cut comes already cut to size and looks neater.
  • Automatic cutter. It saves time and leaves a straight edge. Check it, because not every model has one.
  • Resolution. 300 dpi reads better in small print than 203 dpi. It matters if your ingredients list is long and the font size tight: Regulation 1169/2011 sets a minimum x-height of 1.2 mm (0.9 mm on small packs).
  • Connection. USB is the most reliable. Wi-Fi or network lets you put the printer in the workshop and print from the tablet or the office computer. Bluetooth is for printing from a phone.
  • Easy-to-find consumables. Choose a model with standard rolls you can buy from several shops, not only the original brand.
  • Toughness and cleaning. In the workshop it gets dirty, gets knocked over and works long hours. An easy-to-clean casing and a spot protected from flour and steam extend its life.
  • Compatibility with your software. Some labelling programs only work with specific models. With Recipok there is no problem: it prints from the browser on any installed printer.

What you do not need: colour printing in the printer itself (it costs more and slows things down) or logistics-level speeds if you print a few dozen labels a day.

Try your label before buying the printerCreate a recipe in Recipok and produce the label with ingredients, allergens and nutrition. Adjust the width and you will see what size you need.
Make my label for free

Which printer for your situation

Your workshopRecommendation
Pastry shop or bakery with a shop, a few dozen labels a dayCompact 62 mm direct thermal, USB or Wi-Fi, with cutter
Workshop selling to shops or with an online shop104 mm thermal, for a full label with nutrition and a barcode with the lot
Frozen food, long-life ready meals, shipping boxes104 mm thermal transfer
Internal labels for semi-finished products onlyThe compact 62 mm is more than enough
Very low volume or starting without investingOffice printer with A4 sheets of sticky labels

The printer is only half of it: what you print matters more

An excellent printer with a label typed by hand in a word processor is still a risk: the day you change flour supplier or reformulate a filling, someone has to remember to redo every label. That is where allergen errors creep in.

In Recipok the label comes from the recipe: ingredients in descending order of weight with allergens highlighted, traces, calculated nutrition information, net weight, lot, best-before date, barcode and QR code. If you change an ingredient, the label changes automatically, and from the production order it prints with the real lot. You will find the details in pre-packed label and display counter label, and the step-by-step guide in the help article consumer label. Labels are on every plan, Free included.

A practical tip: before buying, create the label for your most complex product and see how much space it takes. That way you will know whether 62 mm is enough or you need 104.

Settings so the label prints right first time

  1. Install the printer driver and create your roll's paper size in the system.
  2. In the browser's print window choose that size, margins at zero and scale at 100%.
  3. In your software, set the label width in millimetres to match the roll.
  4. Print a test and check that the barcode scans with a reader or with your phone's camera.

If you are also going to equip the workshop with a tablet, a desktop computer or a barcode scanner, we cover it in the essential devices for a food workshop.

Frequently asked questions

Do I need a special printer to print labels with Recipok?
No. Recipok prints from the browser, so any printer installed on your computer or tablet will do: thermal roll, sticker sheets or office printer. There is nothing to install.
Direct thermal or thermal transfer?
For products sold within days or weeks, direct thermal is enough and uses no ribbon. If the label has to last months, withstand freezing, humidity or rubbing, or you want to print on plastic, choose thermal transfer.
Can I print in colour?
A direct thermal printer only prints in black. If you want colour, the usual solution is to buy the roll pre-printed with your logo and colours, and add the changing details on top in black.
Where can I buy a label printer that works with Recipok?
Recipok prints on any thermal label printer. Buy it from a distributor in your country: choose a model with good technical support and rolls that are easy to find near you.

Keep reading

Costs, labels and traceability that update themselves

Start free with 12 recipes. No card needed.